GVM calculator: check your loaded tow vehicle against its GVM
Is your loaded car over its GVM? Check your tow vehicle, its gear, its passengers and the tow ball against the rating, using your own figures.
GVM is the most your tow vehicle may weigh fully loaded, as set by its manufacturer. It is a rating, not a measurement, and it counts everything in and on the car, including the tow ball mass when a caravan is hitched. A caravan pressing 250 kg onto the ball uses 250 kg of GVM before anyone has packed the car.
What the check does
The Load Lab adds up your car as you drive it: the car itself, fuel, every passenger, your gear and the tow ball mass. It compares that total with your car's GVM. It also works out where the load sits, so it shows the front and rear axle loads against their own limits as well. Change anything and the result updates live. Anything we fill in for you, you can type over with your own number.
What you need
- Your tow vehicle: pick it and we fill in its published ratings, or type your own
- Accessories fitted since it left the factory, such as a bull bar, drawers or a canopy
- How much fuel you carry, and who is on board
- What you pack, and roughly where it sits
- If you tow, the caravan's plate figures: tare, ATM and GTM
Common questions
Why is my result close to GVM when the brochure payload looked fine?
Accessories and fuel add up fast. A full 80 litre diesel tank is roughly 65–70 kg, and Queensland's TMR has a sample list of eight accessories and a family of four that adds 586 kg.
Can I be under GVM and still over a limit?
Yes. Either axle can be over its own limit while the total is under GVM. See front and rear axle limits.
Is the result a weighing?
No. It is an estimate modelled from the figures you give it. A weighbridge measures: the reading with the car on the bridge and the caravan's wheels off it is your loaded tow vehicle. See how to weigh your rig. Our full guide is what is GVM.